[users] Need help with a package update issue

[Router]

Please pardon me if this is the wrong mailing list - and if there is a
better one please tell me.

CentOS 6 - 64 bit

Software Update recently offered to upgrade clamtk. The update process
gave me this error:

Resolving Dependencies
--> Running transaction check
---> Package clamtk.noarch 0:4.25-1.el6.rf will be updated
---> Package clamtk.noarch 0:4.45-1.el6.rf will be an update
--> Processing Dependency: perl(ClamTk::Submit) for package:
clamtk-4.45-1.el6.rf.noarch
--> Processing Dependency: perl(ClamTk::Device) for package:
clamtk-4.45-1.el6.rf.noarch
--> Finished Dependency Resolution
Error: Package: clamtk-4.45-1.el6.rf.noarch (rpmforge)
Requires: perl(ClamTk::Submit)
Error: Package: clamtk-4.45-1.el6.rf.noarch (rpmforge)
Requires: perl(ClamTk::Device)
You could try using --skip-broken to work around the problem

I have perl installed:

[root at taylor12 ken]# rpm -qa perl
perl-5.10.1-131.el6_4.x86_64

clamtk is a repoforge (rpmforge) package. Where do I turn for help or to
report this issue?

TIA,

Ken

[Darr247]

Post by Router
clamtk-4.45-1.el6.rf.noarch
clamtk-4.45-1.el6.rf.noarch
--> Finished Dependency Resolution
Error: Package: clamtk-4.45-1.el6.rf.noarch (rpmforge)
Requires: perl(ClamTk::Submit)
Error: Package: clamtk-4.45-1.el6.rf.noarch (rpmforge)
Requires: perl(ClamTk::Device)
You could try using --skip-broken to work around the problem

I reported the same messages here on 9/29 @11:29 zulu, but haven't heard
anything back yet.
I'm also running CentOS 6.x 64-bit.

[Darr247]

Post by Router
Error: Package: clamtk-4.45-1.el6.rf.noarch (rpmforge)
Requires: perl(ClamTk::Submit)
Error: Package: clamtk-4.45-1.el6.rf.noarch (rpmforge)
Requires: perl(ClamTk::Device)
You could try using --skip-broken to work around the problem

--skip-broken doesn't help, of course.
And as far as I can tell, Dag hasn't fixed the package in this list's repo.

Here's what I did to upgrade:

$ wget -P ~/Downloads
http://downloads.sourceforge.net/project/clamtk/ClamTk/4.45/clamtk-4.45-1.el6.noarch.rpm

--2013-10-10 22:58:54--
http://downloads.sourceforge.net/project/clamtk/ClamTk/4.45/clamtk-4.45-1.el6.noarch.rpm
Resolving downloads.sourceforge.net... 216.34.181.59
Connecting to downloads.sourceforge.net|216.34.181.59|:80... connected.
HTTP request sent, awaiting response... 302 Found
Location:
http://softlayer-dal.dl.sourceforge.net/project/clamtk/ClamTk/4.45/clamtk-4.45-1.el6.noarch.rpm
[following]
--2013-10-10 22:58:54--
http://softlayer-dal.dl.sourceforge.net/project/clamtk/ClamTk/4.45/clamtk-4.45-1.el6.noarch.rpm
Resolving softlayer-dal.dl.sourceforge.net... 67.228.157.232
Connecting to softlayer-dal.dl.sourceforge.net|67.228.157.232|:80...
connected.
HTTP request sent, awaiting response... 200 OK
Length: 299733 (293K) [application/octet-stream]
Saving to: ?/home/AX4P3000/Downloads/clamtk-4.45-1.el6.noarch.rpm?
100%[==========================================================================================>]
299,733 341K/s in 0.9s
2013-10-10 22:58:55 (341 KB/s) -
?/home/AX4P3000/Downloads/clamtk-4.45-1.el6.noarch.rpm? saved
[299733/299733]

Then

$ sudo yum install ~/Downloads/clamtk-4.45-1.el6.noarch.rpm

Loaded plugins: downloadonly, fastestmirror, kabi, presto, priorities,
protectbase, refresh-packagekit, tmprepo, verify
Loading support for CentOS kernel ABI
Loading mirror speeds from cached hostfile
* base: mirror.thelinuxfix.com
* contrib: mirrors.gigenet.com
* epel: mirror.utexas.edu
* epel-debuginfo: mirror.utexas.edu
* extras: mirror.fdcservers.net
* rpmforge: mirror.yongbok.net
* updates: bay.uchicago.edu
0 packages excluded due to repository protections
Setting up Install Process
Examining /home/AX4P3000/Downloads/clamtk-4.45-1.el6.noarch.rpm:
clamtk-4.45-1.el6.noarch
Marking /home/AX4P3000/Downloads/clamtk-4.45-1.el6.noarch.rpm as an
update to clamtk-4.25-1.el6.rf.noarch
Resolving Dependencies
--> Running transaction check
---> Package clamtk.noarch 0:4.25-1.el6.rf will be updated
---> Package clamtk.noarch 0:4.45-1.el6 will be an update
--> Finished Dependency Resolution
Dependencies Resolved
======================================================================================================================================
Package Arch Version Repository Size
======================================================================================================================================
Updating:
clamtk noarch 4.45-1.el6 /clamtk-4.45-1.el6.noarch 1.0 M
Transaction Summary
======================================================================================================================================
Upgrade 1 Package(s)
Total size: 1.0 M
Is this ok [y/N]: y
Downloading Packages:
Running rpm_check_debug
Running Transaction Test
Transaction Test Succeeded
Running Transaction
Updating : clamtk-4.45-1.el6.noarch
1/2 Cleanup : clamtk-4.25-1.el6.rf.noarch
2/2 Verifying : clamtk-4.45-1.el6.noarch
1/2 Verifying : clamtk-4.25-1.el6.rf.noarch
2/2 Updated : clamtk.noarch 0:4.45-1.el6
Complete!

So, the rpm directly from ClamTk's sourceforge.net page works fine. :)

Hope that helps!

[Router]

Thanks darr247. I may give that a try. In the interim update has
disappeared from the update list so I am not sure what that means. Ken

Post by Darr247

Post by Router
Error: Package: clamtk-4.45-1.el6.rf.noarch (rpmforge)
Requires: perl(ClamTk::Submit)
Error: Package: clamtk-4.45-1.el6.rf.noarch (rpmforge)
Requires: perl(ClamTk::Device)
You could try using --skip-broken to work around the problem

--skip-broken doesn't help, of course.
And as far as I can tell, Dag hasn't fixed the package in this list's repo.
$ wget -P ~/Downloads
http://downloads.sourceforge.net/project/clamtk/ClamTk/4.45/clamtk-4.45-1.el6.noarch.rpm
--2013-10-10 22:58:54--
http://downloads.sourceforge.net/project/clamtk/ClamTk/4.45/clamtk-4.45-1.el6.noarch.rpm
Resolving downloads.sourceforge.net... 216.34.181.59
Connecting to downloads.sourceforge.net|216.34.181.59|:80... connected.
HTTP request sent, awaiting response... 302 Found
http://softlayer-dal.dl.sourceforge.net/project/clamtk/ClamTk/4.45/clamtk-4.45-1.el6.noarch.rpm
[following]
--2013-10-10 22:58:54--
http://softlayer-dal.dl.sourceforge.net/project/clamtk/ClamTk/4.45/clamtk-4.45-1.el6.noarch.rpm
Resolving softlayer-dal.dl.sourceforge.net... 67.228.157.232
Connecting to softlayer-dal.dl.sourceforge.net|67.228.157.232|:80...
connected.
HTTP request sent, awaiting response... 200 OK
Length: 299733 (293K) [application/octet-stream]
Saving to: ?/home/AX4P3000/Downloads/clamtk-4.45-1.el6.noarch.rpm?
100%[==========================================================================================>]
299,733 341K/s in 0.9s
2013-10-10 22:58:55 (341 KB/s) -
?/home/AX4P3000/Downloads/clamtk-4.45-1.el6.noarch.rpm? saved
[299733/299733]
Then
$ sudo yum install ~/Downloads/clamtk-4.45-1.el6.noarch.rpm
Loaded plugins: downloadonly, fastestmirror, kabi, presto, priorities,
protectbase, refresh-packagekit, tmprepo, verify
Loading support for CentOS kernel ABI
Loading mirror speeds from cached hostfile
* base: mirror.thelinuxfix.com
* contrib: mirrors.gigenet.com
* epel: mirror.utexas.edu
* epel-debuginfo: mirror.utexas.edu
* extras: mirror.fdcservers.net
* rpmforge: mirror.yongbok.net
* updates: bay.uchicago.edu
0 packages excluded due to repository protections
Setting up Install Process
clamtk-4.45-1.el6.noarch
Marking /home/AX4P3000/Downloads/clamtk-4.45-1.el6.noarch.rpm as an
update to clamtk-4.25-1.el6.rf.noarch
Resolving Dependencies
--> Running transaction check
---> Package clamtk.noarch 0:4.25-1.el6.rf will be updated
---> Package clamtk.noarch 0:4.45-1.el6 will be an update
--> Finished Dependency Resolution
Dependencies Resolved
======================================================================================================================================
Package Arch Version Repository Size
======================================================================================================================================
clamtk noarch 4.45-1.el6 /clamtk-4.45-1.el6.noarch 1.0 M
Transaction Summary
======================================================================================================================================
Upgrade 1 Package(s)
Total size: 1.0 M
Is this ok [y/N]: y
Running rpm_check_debug
Running Transaction Test
Transaction Test Succeeded
Running Transaction
Updating : clamtk-4.45-1.el6.noarch
1/2 Cleanup : clamtk-4.25-1.el6.rf.noarch
2/2 Verifying : clamtk-4.45-1.el6.noarch
1/2 Verifying : clamtk-4.25-1.el6.rf.noarch
2/2 Updated : clamtk.noarch 0:4.45-1.el6
Complete!
So, the rpm directly from ClamTk's sourceforge.net page works fine. :)
Hope that helps!
_______________________________________________
users mailing list
users at lists.repoforge.org
http://lists.repoforge.org/mailman/listinfo/users