[users] clamav 0.98-2

[José Damián Benavent]

Hi

According to the ClamAV website (http://www.clamav.net/lang/en/) the
lastest release of ClamAV is 0.98-1.

But in the clamav subdirectory in RepoForge.org there are found packages of
0.98-2 release.

What is this new release?

Thanx in advance
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.repoforge.org/pipermail/users/attachments/20140326/d7fe6530/attachment.html>

[Stefano Canepa]

First of all sorry for the top posting I cannot find a correct setting for
reply in this fu
. Outlook.



Please do not get confused by upstream version that is 0.98.1 (note the dot
before the 1) and package version 0.98-2 (not the dash before the 2).



RPM version are created following the rules that are explained quite well in
http://docs.fedoraproject.org/en-US/Fedora_Draft_Documentation/0.1/html/RPM_
Guide/ch09s03.html



In short terms -2 means that the SPEC file was changes not the content of
the tarball of the upstream release.



Hope this helps

Stefano



Da: users-bounces at lists.repoforge.org
[mailto:users-bounces at lists.repoforge.org] Per conto di Jos? Dami?n Benavent
Inviato: mercoled? 26 marzo 2014 08:42
A: users at lists.repoforge.org
Oggetto: [users] clamav 0.98-2



Hi

According to the ClamAV website (http://www.clamav.net/lang/en/) the lastest
release of ClamAV is 0.98-1.

But in the clamav subdirectory in RepoForge.org there are found packages of
0.98-2 release.


What is this new release?

Thanx in advance

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.repoforge.org/pipermail/users/attachments/20140326/6f983854/attachment.html>

[Darr247]

Post by Stefano Canepa
First of all sorry for the top posting I cannot find a correct setting
for reply in this fu.... Outlook.

http://home.in.tum.de/~jain/software/outlook-quotefix/

The free (donationware) program QuoteFix not only rewraps and keeps
nested quotes readable, there's an option in its settings to place the
cursor BELOW the quoted portion on all replies. When I used it with
Outlook Express I found the 'use clipboard' option to work best. YMMV
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.repoforge.org/pipermail/users/attachments/20140326/0da977a6/attachment.html>

[Stefano Canepa]

Post by Stefano Canepa
First of all sorry for the top posting I cannot find a correct setting
for reply in this fu?. Outlook.
http://home.in.tum.de/~jain/software/outlook-quotefix/
The free (donationware) program QuoteFix not only rewraps and keeps
nested quotes readable, there's an option in its settings to place the
cursor BELOW the quoted portion on all replies.? When I used it with
Outlook Express I found the 'use clipboard' option to work best. YMMV

Thanks very much.

This was not the solution with outlook 2010 but pointed me to the right
solutiom

Bye
Stefano

--
Stefano Canepa

Senior Software Developer and IT Manager

PENTA Engineering srl
Via Passo Buole, 5 int.A.16152 - Genova - Italy

tel.: [phone] Fax.: [phone]

s.canepa at pentaengineering.it

[David Hrbáč]

Post by José Damián Benavent
Hi
According to the ClamAV website (http://www.clamav.net/lang/en/) the
lastest release of ClamAV is 0.98-1.
But in the clamav subdirectory in RepoForge.org there are found
packages of 0.98-2 release.
What is this new release?
Thanx in advance
_______________________________________________
users mailing list
users at lists.repoforge.org
http://lists.repoforge.org/mailman/listinfo/users

Jos?,

Lookup list history for repoforge updates repo, see:
http://fs11.vsb.cz/hrb33/el6/repoforge-updates/stable/i386/repoview/

Regards,
DG
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.repoforge.org/pipermail/users/attachments/20140402/0baec813/attachment.html>