[users] Repoforge updates and the current state of the repo

[David Hrbáč]

Hi everybody,

As you might discover the current state of the RepoForge is very
unhappy. Maybe the project is at the end. We do not have updates for
about six months notwithstanding we do have quite a lot of commits
within the repository on GitHub.

We as developers/commiters do not have access to RepoForge build stack
and the signing key. Dag has no time, we all understand this, but the
community is in a bad need of updates. Especially the security ones.
Because of this situation I have prepared update repository to handle
the updates outside the RepoForge scope. Packages are taken from
RepoForge GitHub repository and signed with my personal key. I'm
thinking about creating a new key for RepoForge project and resigning in
the future.

You can find repositories at:

http://fs11.vsb.cz/hrb33/el6/repoforge-updates/stable/i386/repoview/
http://fs11.vsb.cz/hrb33/el6/repoforge-updates/stable/x86_64/repoview/
http://fs11.vsb.cz/hrb33/el6/repoforge-updates/stable/SRPMS/repoview/
http://fs11.vsb.cz/hrb33/el6/repoforge-updates/stable/debug-i386/repoview/
http://fs11.vsb.cz/hrb33/el6/repoforge-updates/stable/debug-x86_64/repoview/
http://fs11.vsb.cz/hrb33/el5/repoforge-updates/stable/i386/repoview/
http://fs11.vsb.cz/hrb33/el5/repoforge-updates/stable/x86_64/repoview/
http://fs11.vsb.cz/hrb33/el5/repoforge-updates/stable/SRPMS/repoview/
http://fs11.vsb.cz/hrb33/el5/repoforge-updates/stable/debug-i386/repoview/
http://fs11.vsb.cz/hrb33/el5/repoforge-updates/stable/debug-x86_64/repoview/
http://fs11.vsb.cz/hrb33/el4/repoforge-updates/stable/i386/repoview/
http://fs11.vsb.cz/hrb33/el4/repoforge-updates/stable/x86_64/repoview/
http://fs11.vsb.cz/hrb33/el4/repoforge-updates/stable/SRPMS/repoview/
http://fs11.vsb.cz/hrb33/el4/repoforge-updates/stable/debug-i386/repoview/
http://fs11.vsb.cz/hrb33/el4/repoforge-updates/stable/debug-x86_64/repoview/


Repository can be installed with these packages:

http://fs11.vsb.cz/hrb33/el6/repoforge-updates/stable/i386/repoforge-updates-release-0.2-1.el6.rf.i686.rpm
http://fs11.vsb.cz/hrb33/el6/repoforge-updates/stable/x86_64/repoforge-updates-release-0.2-1.el6.rf.x86_64.rpm
http://fs11.vsb.cz/hrb33/el5/repoforge-updates/stable/i386/repoforge-updates-release-0.2-1.el5.rf.i386.rpm
http://fs11.vsb.cz/hrb33/el5/repoforge-updates/stable/x86_64/repoforge-updates-release-0.2-1.el5.rf.x86_64.rpm
http://fs11.vsb.cz/hrb33/el4/repoforge-updates/stable/i386/repoforge-updates-release-0.2-1.el4.rf.i386.rpm
http://fs11.vsb.cz/hrb33/el4/repoforge-updates/stable/x86_64/repoforge-updates-release-0.2-1.el4.rf.x86_64.rpm


I know that this is unhappy situation and bad solution. But right now
there's no better one and take it as a step-in, a temporary solution.

Looking forward to hearing from you all soon,
David Hrb??

[rfusers]

Thanks for your efforts. Installed your clamav stuff on a couple of boxes and working great. 0.98.1 even.. kudos!



-----Original Message-----
From: users-bounces at lists.repoforge.org [mailto:users-bounces at lists.repoforge.org] On Behalf Of David Hrb?c
Sent: Thursday, September 19, 2013 3:38 PM
To: Discussions regarding Repoforge for users
Subject: [users] Repoforge updates and the current state of the repo

Hi everybody,

As you might discover the current state of the RepoForge is very unhappy. Maybe the project is at the end. We do not have updates for about six months notwithstanding we do have quite a lot of commits within the repository on GitHub.

We as developers/commiters do not have access to RepoForge build stack and the signing key. Dag has no time, we all understand this, but the community is in a bad need of updates. Especially the security ones.
Because of this situation I have prepared update repository to handle the updates outside the RepoForge scope. Packages are taken from RepoForge GitHub repository and signed with my personal key. I'm thinking about creating a new key for RepoForge project and resigning in the future.

You can find repositories at:

http://fs11.vsb.cz/hrb33/el6/repoforge-updates/stable/i386/repoview/
http://fs11.vsb.cz/hrb33/el6/repoforge-updates/stable/x86_64/repoview/
http://fs11.vsb.cz/hrb33/el6/repoforge-updates/stable/SRPMS/repoview/
http://fs11.vsb.cz/hrb33/el6/repoforge-updates/stable/debug-i386/repoview/
http://fs11.vsb.cz/hrb33/el6/repoforge-updates/stable/debug-x86_64/repoview/
http://fs11.vsb.cz/hrb33/el5/repoforge-updates/stable/i386/repoview/
http://fs11.vsb.cz/hrb33/el5/repoforge-updates/stable/x86_64/repoview/
http://fs11.vsb.cz/hrb33/el5/repoforge-updates/stable/SRPMS/repoview/
http://fs11.vsb.cz/hrb33/el5/repoforge-updates/stable/debug-i386/repoview/
http://fs11.vsb.cz/hrb33/el5/repoforge-updates/stable/debug-x86_64/repoview/
http://fs11.vsb.cz/hrb33/el4/repoforge-updates/stable/i386/repoview/
http://fs11.vsb.cz/hrb33/el4/repoforge-updates/stable/x86_64/repoview/
http://fs11.vsb.cz/hrb33/el4/repoforge-updates/stable/SRPMS/repoview/
http://fs11.vsb.cz/hrb33/el4/repoforge-updates/stable/debug-i386/repoview/
http://fs11.vsb.cz/hrb33/el4/repoforge-updates/stable/debug-x86_64/repoview/


Repository can be installed with these packages:

http://fs11.vsb.cz/hrb33/el6/repoforge-updates/stable/i386/repoforge-updates-release-0.2-1.el6.rf.i686.rpm
http://fs11.vsb.cz/hrb33/el6/repoforge-updates/stable/x86_64/repoforge-updates-release-0.2-1.el6.rf.x86_64.rpm
http://fs11.vsb.cz/hrb33/el5/repoforge-updates/stable/i386/repoforge-updates-release-0.2-1.el5.rf.i386.rpm
http://fs11.vsb.cz/hrb33/el5/repoforge-updates/stable/x86_64/repoforge-updates-release-0.2-1.el5.rf.x86_64.rpm
http://fs11.vsb.cz/hrb33/el4/repoforge-updates/stable/i386/repoforge-updates-release-0.2-1.el4.rf.i386.rpm
http://fs11.vsb.cz/hrb33/el4/repoforge-updates/stable/x86_64/repoforge-updates-release-0.2-1.el4.rf.x86_64.rpm


I know that this is unhappy situation and bad solution. But right now there's no better one and take it as a step-in, a temporary solution.

Looking forward to hearing from you all soon, David Hrb??

_______________________________________________
users mailing list
users at lists.repoforge.org
http://lists.repoforge.org/mailman/listinfo/users

--
This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.

[Fred Kienker]

I feel foolish, but I tried to use the 0.98.1 clamav packages David
generously provided without success. Everything seemed to go smoothly
but there were no init scripts installed for starting and stopping
clamav. Fearing I had totally messed up, I backtracked to the EPEL
packages which were a bit more current. Anyone have any hints as to what
I am doing wrong?

Thanks in advance,
Fred

Best regards,
Fred

-----Original Message-----
From: rfusers [mailto:rfusers at okla.com]
Sent: Monday, September 23, 2013 8:53 AM
To: 'Discussions regarding Repoforge for users'
Subject: Re: [users] Repoforge updates and the current state of the repo

Thanks for your efforts. Installed your clamav stuff on a couple of
boxes and working great. 0.98.1 even.. kudos!



-----Original Message-----
From: users-bounces at lists.repoforge.org
[mailto:users-bounces at lists.repoforge.org] On Behalf Of David Hrbc
Sent: Thursday, September 19, 2013 3:38 PM
To: Discussions regarding Repoforge for users
Subject: [users] Repoforge updates and the current state of the repo

Hi everybody,

As you might discover the current state of the RepoForge is very
unhappy. Maybe the project is at the end. We do not have updates for
about six months notwithstanding we do have quite a lot of commits
within the repository on GitHub.

We as developers/commiters do not have access to RepoForge build stack
and the signing key. Dag has no time, we all understand this, but the
community is in a bad need of updates. Especially the security ones.
Because of this situation I have prepared update repository to handle
the updates outside the RepoForge scope. Packages are taken from
RepoForge GitHub repository and signed with my personal key. I'm
thinking about creating a new key for RepoForge project and resigning in
the future.

You can find repositories at:

http://fs11.vsb.cz/hrb33/el6/repoforge-updates/stable/i386/repoview/
http://fs11.vsb.cz/hrb33/el6/repoforge-updates/stable/x86_64/repoview/
http://fs11.vsb.cz/hrb33/el6/repoforge-updates/stable/SRPMS/repoview/
http://fs11.vsb.cz/hrb33/el6/repoforge-updates/stable/debug-i386/repoview/
http://fs11.vsb.cz/hrb33/el6/repoforge-updates/stable/debug-x86_64/repoview/
http://fs11.vsb.cz/hrb33/el5/repoforge-updates/stable/i386/repoview/
http://fs11.vsb.cz/hrb33/el5/repoforge-updates/stable/x86_64/repoview/
http://fs11.vsb.cz/hrb33/el5/repoforge-updates/stable/SRPMS/repoview/
http://fs11.vsb.cz/hrb33/el5/repoforge-updates/stable/debug-i386/repoview/
http://fs11.vsb.cz/hrb33/el5/repoforge-updates/stable/debug-x86_64/repoview/
http://fs11.vsb.cz/hrb33/el4/repoforge-updates/stable/i386/repoview/
http://fs11.vsb.cz/hrb33/el4/repoforge-updates/stable/x86_64/repoview/
http://fs11.vsb.cz/hrb33/el4/repoforge-updates/stable/SRPMS/repoview/
http://fs11.vsb.cz/hrb33/el4/repoforge-updates/stable/debug-i386/repoview/
http://fs11.vsb.cz/hrb33/el4/repoforge-updates/stable/debug-x86_64/repoview/


Repository can be installed with these packages:

http://fs11.vsb.cz/hrb33/el6/repoforge-updates/stable/i386/repoforge-updates-release-0.2-1.el6.rf.i686.rpm
http://fs11.vsb.cz/hrb33/el6/repoforge-updates/stable/x86_64/repoforge-updates-release-0.2-1.el6.rf.x86_64.rpm
http://fs11.vsb.cz/hrb33/el5/repoforge-updates/stable/i386/repoforge-updates-release-0.2-1.el5.rf.i386.rpm
http://fs11.vsb.cz/hrb33/el5/repoforge-updates/stable/x86_64/repoforge-updates-release-0.2-1.el5.rf.x86_64.rpm
http://fs11.vsb.cz/hrb33/el4/repoforge-updates/stable/i386/repoforge-updates-release-0.2-1.el4.rf.i386.rpm
http://fs11.vsb.cz/hrb33/el4/repoforge-updates/stable/x86_64/repoforge-updates-release-0.2-1.el4.rf.x86_64.rpm


I know that this is unhappy situation and bad solution. But right now
there's no better one and take it as a step-in, a temporary solution.

Looking forward to hearing from you all soon, David Hrb

_______________________________________________
users mailing list
users at lists.repoforge.org
http://lists.repoforge.org/mailman/listinfo/users

--
This message has been scanned for viruses and dangerous content by
MailScanner, and is believed to be clean.



--
This message has been scanned for viruses and dangerous content by
MailScanner, and is believed to be clean.

[David Hrbáč]

Post by Fred Kienker
I feel foolish, but I tried to use the 0.98.1 clamav packages David
generously provided without success. Everything seemed to go smoothly
but there were no init scripts installed for starting and stopping
clamav. Fearing I had totally messed up, I backtracked to the EPEL
packages which were a bit more current. Anyone have any hints as to what
I am doing wrong?
Thanks in advance,
Fred
Best regards,
Fred

Fred,

Clamav package contains no init script. This script is within the clamd
package...

Regards,
David Hrb??

[Fred Kienker]

Thanks for the hint! It would be great if you and Dag can work out how
to continue this effort going forward. I've used Repoforge for a number
of years and greatly appreciate it. There really is no viable
alternative repo.

Best regards,
Fred Kienker

-----Original Message-----
From: David Hrb [mailto:david-lists at hrbac.cz]
Sent: Monday, September 23, 2013 3:52 PM
To: Discussions regarding Repoforge for users
Subject: Re: [users] Repoforge updates and the current state of the repo

Post by Fred Kienker
I feel foolish, but I tried to use the 0.98.1 clamav packages David
generously provided without success. Everything seemed to go smoothly
but there were no init scripts installed for starting and stopping
clamav. Fearing I had totally messed up, I backtracked to the EPEL
packages which were a bit more current. Anyone have any hints as to
what I am doing wrong?
Thanks in advance,
Fred
Best regards,
Fred

Fred,

Clamav package contains no init script. This script is within the clamd
package...

Regards,
David Hrb

[David Hrbáč]

Post by Fred Kienker
Thanks for the hint! It would be great if you and Dag can work out how
to continue this effort going forward. I've used Repoforge for a number
of years and greatly appreciate it. There really is no viable
alternative repo.
Best regards,
Fred Kienker

I'd like to say that Dag is trying hardly with us to keep RepoForge
continuing. RepoForge has everything in a good shape, but the updates.
We are now working together with Dag to assume the responsibility for
the updates.

Thanks,
David Hrb??

[David Hrbáč]

Post by David Hrbáč
I'd like to say that Dag is trying hardly with us to keep RepoForge
continuing. RepoForge has everything in a good shape, but the updates.
We are now working together with Dag to assume the responsibility for
the updates.
Thanks,
David Hrb??

I'm sorry for my confusing statement. The message is that Dag is working
very hard with us to keep RF up.

Regards,
DH

PS: Paul, thanks for pointig my fault out...